L969 Plyvolt® Linerless EPR, Self-bonding High Voltage Insulating Tape A 30-mil (0,76mm) ethylene proplyene rubber (EPR) self-bonding high voltage tape for insulating and jacketing splices through 69kV. L969 Plyvolt is a linerless tape permitting quicker application than a tape with a liner. Yields a void-free build-up. Excellent corona, ozone and chemical resistance. L969 Plyvolt can also be used for building stress-cones on power cable through 35kV. ASTM-D-4388, HH-I-553C. Product Specifications

W963 Plysafe® EPR, Self-Insulating High Voltage Insulating Tape with Liner
A 30-mil (0,76mm) ethylene proplyene rubber (EPR) self-amalgamating high voltage tape for insulating and jacketing splices through 69kV. W963 Plysafe amalgamates quickly yielding a void-free, electrically stable build-up and is ideal for waterproofing. ASTM-D-4388, HH-I-553C/Grade A, MIL-I-3825B.

Product Specifications

3-Bi-Seal® High Voltage Insulating Tape with Liner
A polyethylene and ethylene propylene rubber-based tape possessing superior electrical, chemical, mechanical and thermal properties. Fuses quickly yielding a void-free, electrically stable build-up. For insulating and jacketing of splices on power cable from 600 volts through 69kV and for building stress cones and jacketing of terminations on power cable from 600 volts through 35kV. Available in 20-mil (0,51mm) or 30-mil (0,76mm) thickness. ASTM-D-4388, HH-I-553C.

Product Specifications: 3-Bi-Seal 20    3-Bi-Seal 30

W962 EPR High Voltage Insulating Tape with Liner
A 20-mil (0,51mm) ethylene propylene rubber (EPR) based high voltage tape with superior electrical, chemical, mechanical and thermal properties. For insulating and jacketing of splices on power cable from 600 volts through 138kV and for building stress-cones and jacketing of terminations on power cable from 600 volts through 35kV. W962 is self-amalgamating. ASTM-D-4388.

Product Specifications

17 Plyshield® EPR Shielding Tapes
A 30-mil (0,76mm) ethylene propylene rubber (EPR) self-amalgamating, conducting tape for shielding high voltage splices and terminations. Use for rebuilding strand shield and insulation shields on high voltage splices and for shielding all types of connections. ASTM-D-4388.

Product Specifications

15 Plybraid® Tinned Copper Shielding
A tinned copper mesh-knit shielding with exceptional conformability. For shielding high voltage splices and terminations.

Product Specifications

20 Plysil® Silicone Rubber Tape
A 20-mil (0,51mm) triangular cross section, self-amalgamating silicone rubber tape used for jacketing high voltage terminations on solid dielectric cable through 69kV. 20 Plysil is track and erosion resistant and can be used as primary insulation for high temperature (180°C) applications. ASTM-D-2148, MIL-I-46852A.

Product Specifications

Plymouth PIB Medium Voltage Tape with Black Liner
A self-amalgamating, polyisobutylene-based medium voltage tape which maintains a tight insulation build-up for void-free electrical stability and permanent resistance to moisture penetration. For insulating and jacketing of splices on power cables from 600 volts through 46kV. Plymouth PIB has excellent stretch capabilities that allow fast taping speeds and is compatible with all extruded dielectric cable insulations.

Product Specifications

ColdTermTM Cold Shrink Cable Termination Kits - Outdoor/Indoor An anti-tracking, skirted silicone rubber cold shrink termination for tape shielded, wire shielded, JCN and Unishield® cables. Universal kit design fits all extruded dielectric cables with unique pull-over tabs for fast and easy installation and superior insulating qualities. Design range covers 5-8kV (3/0 AWG to over 1000kCMIL), 15kV (2AWG to 1000kCMIL), 25-28kV (2/0 AWG to 1000kCMIL). Meets IEEE Standard No. 48, Class 1. * Terminals not included. Product Specifications

Plyterm® Cable Termination Kit For high voltage solid dielectric insulated cable terminations rated 5-15kV. Uses factory designed wrap-around pennants for precise stress cone build-up. Designed specifically for indoor terminations. Convertible to outdoor and contaminated area installation with 20 Plysil silicone protective tape (Cat. #3455). For outdoor applications, use one (1) roll of 20 Plysil for termination kit #2644 5-8kV, three (3) rolls for 9-15kV, four (4) rolls for #2645 and five (5) rolls for #2646. Full instructions provided. Terminal lugs not included. Meets IEEE Standard No. 48. Product Specifications

SWT Stress-Wrap^® Termination Kit
Stress relief of cable insulation shields. For all solid dielectric insulated cable related to 35kV, to 2500kCMIL. Copper and aluminum conductors. Single half-lap applications of Stress-Wrap tape immediately provides stress control and waterproofing. Cable preparation dimensions are not critical. Single kit size fits a wide range of cable sizes. Designed for indoor use, but convertible to outdoor and contaminated area applications when combined with 20 Plysil tape. Selection chart indicates optimum kit size and 20 Plysil quantity for outdoor conversions. Full instructions provided. Terminal lugs not included. Meets IEEE Standard No. 48.U.S. Patent # 4,187,389.

Product Specifications

Plyjoint® Cable Splice Kit For splicing of single conductor, high voltage cables with extruded solid dielectric insulation. Design range covers #8 AWG-1000 kCMIL. 5-15kV. Pre-cut pennant shapes ensure precise, watertight, void-free splices. Quick and reliable. Detailed instructions included. Connectors not included. IEEE Standard No. 404. Product Specifications

SWS Stress-Wrap® Splice Kit
For splicing single conductor solid dielectric insulated cable. 5-15kV, #6 AWG-1000 kCMIL design range. Stress-Wrap technology eliminates the need to pencil cable insulations and allows use of standard non-tapered connectors. Highly reliable splice. Cable preparation dimensions are not critical. Detailed instructions included. Connectors not included. IEEE Standard No. 404. U.S. Patent #4,187,389.

Product Specifications

Plypak^TM Custom Packaged Splicing and Terminating Kits
Factory packed with everything necessary for special splice or termination applications from 5kV-138kV. Our engineering computer processes your job specs and details all the components needed to make a complete splice or termination. Your custom kit will include functionally designed materials, pre-tested connectors/terminal lugs, and clear, easy-to-understand instructions.

Product Specifications

Click here to browse the complete set of our Specification Sheets. To view specifications of a specific product click the link with the product description. You must have the free Adobe Acrobat Reader to view the files. If you do not have it installed, click the button below.